Automatic Fixture Cleaning Machine for squeegee blade, wave pallet, condenser, Hardware types etc.

Environmental protection water-based rotary spray cleaning machine

Parameter characteristics of SW-700S equipment:

1. Automatic cleaning mode: the workpiece rotates with the cleaning basket, and at the same time, the heated cleaning liquid is sprayed by the spray arm Dry the whole process;

2, the whole process visualization: visualization window and LED, lamp device, cleaning process at a glance;

3, scientific nozzle design (patent): using the upper, middle, lower a total of 8 spray arm distribution-completely solve the cleaning blind area, spray arm, nozzle can be removed;

4, visual nozzle pressure can be adjusted: to solve the small, workpiece size in the cleaning under the high pressure spray conditions of collision, splashing problems;

5, the window entrance installation 2 shot safety grille protection, to prevent the cleaning liquid splashing out, to ensure its safety;

6, comprehensive cleaning system: the standard diluent tank rinse tank heating system improves the cleaning efficiency. Shorten the cleaning time, compatible with running water washing
Or chemical cleaning, for thorough and effective cleaning of rosin, welding paste and other organic and inorganic pollutants remaining on the PCBA surface of SMT; THT;

7. Cleaning and rinsing using online independent built-in filtration system, independent electric pump, independent spray arm, independent nozzle, solvent cycle
Use, prevent cleaning and rinsing less string liquid, can improve the service life of rinsing water, reduce the amount of solvent;

8, the fuselage village quality: the overall stainless steel body, acid resistance, alkaline and other cleaning liquid;

9, the software can automatically control the liquid addition and liquid discharge, the solid barrier with emergency stop button, leakage protection function;

10. Lower operating costs: lower equipment investment costs, localized services, teams, and adequate spare parts supply.

Preparation of SW-700S equipment parameters:

Cleaning area: the cleaning liquid storage tank is used to recycle the storage cleaning liquid, and to carry out 4-level filtration, heating, monitoring and liquid level monitoring of the cleaning liquid.
Cleaning water pump: 2.2KW (1), 4 spray arms, 28 nozzles;
Reservoir volume: 90L (1 unit);
Filter device: stainless steel filter mesh 1mm (2 pieces), liquid tank filter bag: 50 mesh (1), clean-line filter bag type 100 mesh (1);
Heating power: 9KW (1 bar), heating temperature: room temperature- -80℃ (adjustable);
Liquid level protection: low, middle, stop, exceed the limit;
Spray pressure: 0.1-0.6Mpa (adjustable)
Bleaching area: rinsing storage tank is used for recycling storage water, and level 4 filtration, heating, monitoring and monitoring of liquid level.
Bleaching water pump: 2.2KW (1) spray arm 4,28 nozzles;
Volume of rinsing storage tank: 90L (1);
Heating power of rinsing water tank: 9KW (1 bar); heating temperature: room temperature- -80℃ (adjustable);
Filter device: stainless steel filter mesh 1mm (2 pieces), water tank filter bag: 50 mesh (1 piece), rinsing online filter element 100 UM (3 pieces);
Liquid level protection: low, middle, stop, exceed the limit;
Spray pressure: 0.1-0.6Mpa (adjustable)

Drying area: the drying section is used to thoroughly dry the product, and heat the wind, wind cutting + heating and temperature monitoring.
Wind blade fan: 5.5KW (1), stainless steel heating pipe: 6KW (1), 3 wind cutting blades, heating temperature: room temperature- -60℃ (adjustable);

Cleaning basket rotating device: the cleaning basket rotating device is composed of deceleration motor, cleaning basket, bearing, etc. The deceleration motor drives the cleaning basket to rotate smoothly;
Motor power: 200W (1 set) frequency converter: 400W (1), 1 test photoelectric switch;

SW-700S from the equipment parameters, it is a clean cleaning speed, high cleaning integration, compact structure of the environmental protection cleaning equipment.

SW-700S rotary spray washer: fully automatic cleaning, rinsing, drying process, and the cleaning process visualization;
(Adopt a unique eight-shot spray arm cleaning, rinsing design, three wind knife air cutting and drying design, cleaning and rinsing using on-line filtration, to ensure cleanliness)
Application in: SMT, DIP equipment cleaning, scraper/suqeegee blade, wave pallet cleaning, condenser cleaning, fixtures cleaning(Material synthetic stone, bakelite, aluminum alloy etc), all kinds of workpiece external surface cleaning, all kinds of hardware machined parts cleaning
After the cleaning, equipment after the disassembly of the parts cleaning, auto parts, various shells, boxes and other surfaces and hole wall residual pollutants;

<img alt="" src="/photo/sunvish/editor/20260911171357_19353.jpg